REVTECH reacteurs
| | | | | |
Version Francaise English Version Version Russe Version espagnole
 
Heating and maintaining in temperatures gases
Heating and maintaining in temperatures liquids
Fields:
 

• CHEMICALS INDUSTRY: Heating of various gases (hydrogen, methane, nitrogen etc.) and liquids (heat-transfer mediums, chemical products), Superheating of steam.
• FOOD INDUSTRY: Heat-transfer oils, food-grade oils, various process fluids.
• PETROCHEMICALS: Oil, refinery gas, nitrogen.
• AERONAUTICAL/AUTOMOBILE: Engine simulation, production of hot air for test beds.
Standard range:
 
Size 1
Power range: de 0 kW to 21 kW
Heat transfer surface: 1m²
Connection: DN40 flanges
Examples: heating 100 kg/h nitrogen for inserting from 20°C to 450°C under 4 bars, maintaining in temperature heat transfer fluid at 300°C in closed circuit.
 
Size 2
Power range: de 0 kW to 40 kW
Heat transfer surface: 1,8 m²
Connection: DN60 flanges
Examples: preheating 90 kg/h natural gas from 20°C to 400°C under 2 bars, superheating steam from 120°C to 210°C.
 
         
 
Size 3
Power range: de 0 kW to 90 kW
Heat transfer surface: 4,5 m²
Connection: DN80 flanges
Examples: sterilisation at 400°C of a flow rate between 0 and 450 kg/h of air containing viruses, heating from 20°C to 40°C of a flow rate between 0 and 14T/h of water containing solids several centimetres in diameter.
 
Size 4
Power range: de 0 kW to 160 kW
Heat transfer surface: 6,2 m²
Connection: DN100 flanges
Examples: simulation of diesel engine exhaust, Tmax= 700°C, flow rate between 0 et 300 kg/h; maintaining in temperature of a variable flow rate of superheated water at 20 bars and 160°C.
 
         
3D Representation :            
      In-line high temperature heater (> 800 °C)
  Fluid heater
     
© REVTECH - ZA de champgrand - Allée des abricotiers - 26270 LORIOL France - Tel.: +33 4 75 60 16 26 - Fax: +33 4 75 60 16 27 | G.V.Creation Realization